fix .5fs files not opening in previous version

• better calculation of ICG B- and X-points
• show all labels when opening file
• ask to save data when opening another file
• changed color for filtered data

• added some respiration related output variables

– added batching of time-based labels

– fixed support for lower than maximum sample frequencies

– speeded up SCL peak calculation

– fixed bugs in aggregated batching

– fixed position of ecg artefacts

– fixed ICG and ECG points calculations

• 5.3.1 release March 2022
  • check for duplicates in label category code.
  • tiny fix results table
• 5.2.4 (February 2022)
  • keep main window in focus after ProgressMonitors
  • time-based vs other labels
  • show text on start page
  • fix editing columns in results table and export
• 5.1 (January 2022)
  • added support for new data format 7fs for new (prototype) ams device
  • lot of changes on label tab
  • 7fs format requires integer instead of short
  • extra option for not discarding beats in ICG
  • fix results tab recalculating too often
  • fix installers for newer Java versions
  • update log4j to 2.17.1 to mitigate vulnerabilities
  • miscellaneous tidbits
• 5.0 release December 2021
• 4.9 (pre-release; October 2021)
  • rearrange gui
  • make scl peak detector and thus opening 5fs files faster
  • calculate imp and ecg averages when creating label
  • default values Y-axes
  • QRSTtab: zoom levels slide more intuitive
• 4.8 (September 2021)
  • added P, P onset points in impedance tab
  • ICG X point after T
  • X axis in milliseconds
  • graph PEP and LVET areas in impedance tab
  • keep order of ECG and ICG points when dragging
  • change order in impedance InfoPanel
• 4.7 (May 2021)
  • read binary files for testing of ams hardware 7 
  • fix hang issue in output table 
  • use native FileDialog on Mac 
  • enable Ctrl-click in overlays for Mac
• 4.5 (March 2021)
  • Made label information tab more user friendly:
    • drag and drop rows in Output Config Editor
    • drag and drop columns in main table
    • right click context menu in table header
    • highlight label in the graphic signal overview on click
    • total recording line at the bottom
    • added several columns
    • show a selection of relevant columns by default
  • Remove spurious peaks in OnlineGraph
  • Show SCL peaks in SCL label tab
  • Average HR and MOT over smaller windows
  • Use the same algoritm for deviant beats in RSA tab as in R-peak tab
• 4.3 (r1156)
  • Added corrected stroke volume, in keeping with Nederend et al. 2017 (http://dx.doi.org/10.1016/j.ijpsycho.2017.07.015).
  • Removed “Age”, “Gender”, “Weight” and “Height” from Label Info tab.
  • Added minute volume column in keeping w/ Nederend 2017 (c.f. above).
  • Renamed ‘old’ minute volume column to “Minute Volume (Kubicek 1966)”.
  • R-peak annotation and IBI classification: renamed “suspicious” to diverging in interface (“suspicious” is maintained @code level). “Highly suspicious” (colored red) is denoted “deviant” and “medium suspicious” (yellow) is denoted “worth checking”.
• 4.2 (r1136)
  • Added a button in QRSToolbar for removal of all artefacts and rescan of the ECG.
• 4.1 (r1135)
  • Adjustments for Mac deployment
  • Re-implementation of x-axis tick marks
  • Improved: Automatic labeling using markers/events in batch mode
  • Other minor improvements/additions
• 4.0 (r1123)
  • Replaced static red grid by dynamic grey grid
  • Append [Subject ID] to Title bar (can be disabled via Settings > General)
  • Improved: File > Batch export data
  • Improved:Impedance Scoring tab > Stroke Volume > Edit
  • Improved Impedance Scoring tab (left panel is now scrollable)
  • Improved Skin Conductance tab
  • Improved:Detect R-Peaks tab > Actions > Show Ectopic Beats
  • Improved: Data > Clear external signals
  • Improved: Data > Export Signal To ASCII
  • Draw SCL in Label Data tab when no ECG and no DZ
  • Other minor improvements/additions
• 3.9 (r1067)
  • Enabled silent (un)installs with “/S” switch
  • VU-DAMS.app built for Mac platform
  • Automatic labeling using events/markers updated with a new template
  • Option to go to the specific suspicious beat (goto function) in the QRS Tab
  • Included Min & Max SCL Values to the Output data
  • View the ectopic beats (PVC & PAC) in a separate window in QRS Tab
  • Add VU-DAMS Software version number to the header file
  • SVN Revision number retrieved using xml file
  • Other minor improvements/additions
• 3.8 (r989)
  • Automatic labeling using markers/events in batch mode
  • Import a maximum of three external signals in VU-DAMS
  • Count of Premature Atrial Contractions (PAC’s) per label added to the output.
  • ICG Characteristic points detection improved
  • VU-DAMS is supported on Mac OS X
  • Serial Communication stabilized
  • Other minor improvements/additions
• 3.6 (r938)
  • Combined Set-up for 64 bit and 32 bit Operating Systems
  • Serial Communication is stabilized
  • Possibility to add Demographic data of the subject and save in the amsdata file.
  • Debug Settings File for technical support is created
  • New check for the corrupted amsdata files
  • The batch process logs are presented to the user
  • Other minor improvements/additions
• 3.5 (r876)
  • DZDT Signal Quality Improved by Filtering
  • Skin Conductance Analysis Updated
  • Watchdog reset and Buffer Overflow error messages implemented
  • AmsSerail.dll now in VU-DAMS setup
  • Other minor improvements/additions
• 3.4 (r837)
  • Batch Export of Beat Information to text file
  • Possibility to mark Premature Ventricular Contractions
  • More options on right click over the label
  • Export PVC counts per label
  • Other minor improvements/additions
• 3.3 (r823)
  • Batch Export of Respiration Data
  • Stroke Volume Calculation problem fixed with old ‘.ams’ format files
  • Z0 is now also displayed in Inspect Data tab for old ‘.ams’ format files
  • Save the user setting files to AppData Directory
  • Sync beats detected with Respiration Data
  • All back to 32 bit version for stable serial communication
  • Other minor improvements/additions
• 3.2 (r802)
  • Import Labels option customized
  • Open and Analyze Files where one or more channels are not recorded with maximum sampling frequency
  • Operating System Check and use of 32/64 bit java respective to operating system
  • Included Java Version and JVM information in the program
  • Event time and Signal Time are synced when raw signal is exported.
  • Electrode distance and Specific Resistivity of the blood values are editable and can be saved to AMSData File.
  • Other minor improvements/additions
• 3.1 (r743)
  • Other minor improvements / additions
• 3.0 (r739)
  • Automatic Scoring for ECG Characteristic Points
  • Skin Conductance Data analyzed & presented in a new tab (under development)
  • Label based export of Skin Conductance Data
  • Option to remove all HIGH & MEDIUM Suspicious Beats in Detect R-Peaks Tab
  • Experimental information added to time based labels
  • Divide a particular label into time labels of chosen interval.
  • Batch Export of Raw Signals with & without label information
  • Batch Analyze & Export Data (ASCII & Excel) for automatic scoring of ECG & ICG Complexes
  • Possible to add labels even if only one channel is recorded
  • Fixed freeze with connection lost problems
  • Automatically establishing connection on connection lost during online mode
  • Instant Heart Rate during online mode
  • Other minor improvements / additions
• 2.2
  • Added Copy/Paste Labels in Label Data tab
  • Added Batch export data to ASCII
  • Added ICG, ECG and SCL warnings in Configure Device window
  • Added “Never ask me again” option to update available window
  • Fixed freeze when opening file without ICG
  • Other minor improvements / additions
• 2.1
  • Fixed error when updating to Java 7
  • Enabled VU-DAMS suite and Bluetooth database updates via internet
  • VU-DAMS suite version now always visible in upper left corner
  • Other minor improvements / additions
• 2.0
  • Many improvements / additions
• 1.01
  • Initial release

• 5.3.1 r
• 5.2.4 (February 2022)
  • keep main window in focus after ProgressMonitors
  • time-based vs other labels
  • show text on start page
  • fix editing columns in results table and export
• 5.1 (January 2022)
  • added support for new data format 7fs for new (prototype) ams device
  • lot of changes on label tab
  • 7fs format requires integer instead of short
  • extra option for not discarding beats in ICG
  • fix results tab recalculating too often
  • fix installers for newer Java versions
  • update log4j to 2.17.1 to mitigate vulnerabilities
  • miscellaneous tidbits
• 5.0 release December 2021
• 4.9 (pre-release; October 2021)
  • rearrange gui
  • make scl peak detector and thus opening 5fs files faster
  • calculate imp and ecg averages when creating label
  • default values Y-axes
  • QRSTtab: zoom levels slide more intuitive
• 4.8 (September 2021)
  • added P, P onset points in impedance tab
  • ICG X point after T
  • X axis in milliseconds
  • graph PEP and LVET areas in impedance tab
  • keep order of ECG and ICG points when dragging
  • change order in impedance InfoPanel
• 4.7 (May 2021)
  • read binary files for testing of ams hardware 7 
  • fix hang issue in output table 
  • use native FileDialog on Mac 
  • enable Ctrl-click in overlays for Mac
• 4.5 (March 2021)
  • Made label information tab more user friendly:
    • drag and drop rows in Output Config Editor
    • drag and drop columns in main table
    • right click context menu in table header
    • highlight label in the graphic signal overview on click
    • total recording line at the bottom
    • added several columns
    • show a selection of relevant columns by default
  • Remove spurious peaks in OnlineGraph
  • Show SCL peaks in SCL label tab
  • Average HR and MOT over smaller windows
  • Use the same algoritm for deviant beats in RSA tab as in R-peak tab
• 4.3 (r1156)
  • Added corrected stroke volume, in keeping with Nederend et al. 2017 (http://dx.doi.org/10.1016/j.ijpsycho.2017.07.015).
  • Removed “Age”, “Gender”, “Weight” and “Height” from Label Info tab.
  • Added minute volume column in keeping w/ Nederend 2017 (c.f. above).
  • Renamed ‘old’ minute volume column to “Minute Volume (Kubicek 1966)”.
  • R-peak annotation and IBI classification: renamed “suspicious” to diverging in interface (“suspicious” is maintained @code level). “Highly suspicious” (colored red) is denoted “deviant” and “medium suspicious” (yellow) is denoted “worth checking”.
• 4.2 (r1136)
  • Added a button in QRSToolbar for removal of all artefacts and rescan of the ECG.
• 4.1 (r1135)
  • Adjustments for Mac deployment
  • Re-implementation of x-axis tick marks
  • Improved: Automatic labeling using markers/events in batch mode
  • Other minor improvements/additions
• 4.0 (r1123)
  • Replaced static red grid by dynamic grey grid
  • Append [Subject ID] to Title bar (can be disabled via Settings > General)
  • Improved: File > Batch export data
  • Improved:Impedance Scoring tab > Stroke Volume > Edit
  • Improved Impedance Scoring tab (left panel is now scrollable)
  • Improved Skin Conductance tab
  • Improved:Detect R-Peaks tab > Actions > Show Ectopic Beats
  • Improved: Data > Clear external signals
  • Improved: Data > Export Signal To ASCII
  • Draw SCL in Label Data tab when no ECG and no DZ
  • Other minor improvements/additions
• 3.9 (r1067)
  • Enabled silent (un)installs with “/S” switch
  • VU-DAMS.app built for Mac platform
  • Automatic labeling using events/markers updated with a new template
  • Option to go to the specific suspicious beat (goto function) in the QRS Tab
  • Included Min & Max SCL Values to the Output data
  • View the ectopic beats (PVC & PAC) in a separate window in QRS Tab
  • Add VU-DAMS Software version number to the header file
  • SVN Revision number retrieved using xml file
  • Other minor improvements/additions
• 3.8 (r989)
  • Automatic labeling using markers/events in batch mode
  • Import a maximum of three external signals in VU-DAMS
  • Count of Premature Atrial Contractions (PAC’s) per label added to the output.
  • ICG Characteristic points detection improved
  • VU-DAMS is supported on Mac OS X
  • Serial Communication stabilized
  • Other minor improvements/additions
• 3.6 (r938)
  • Combined Set-up for 64 bit and 32 bit Operating Systems
  • Serial Communication is stabilized
  • Possibility to add Demographic data of the subject and save in the amsdata file.
  • Debug Settings File for technical support is created
  • New check for the corrupted amsdata files
  • The batch process logs are presented to the user
  • Other minor improvements/additions
• 3.5 (r876)
  • DZDT Signal Quality Improved by Filtering
  • Skin Conductance Analysis Updated
  • Watchdog reset and Buffer Overflow error messages implemented
  • AmsSerail.dll now in VU-DAMS setup
  • Other minor improvements/additions
• 3.4 (r837)
  • Batch Export of Beat Information to text file
  • Possibility to mark Premature Ventricular Contractions
  • More options on right click over the label
  • Export PVC counts per label
  • Other minor improvements/additions
• 3.3 (r823)
  • Batch Export of Respiration Data
  • Stroke Volume Calculation problem fixed with old ‘.ams’ format files
  • Z0 is now also displayed in Inspect Data tab for old ‘.ams’ format files
  • Save the user setting files to AppData Directory
  • Sync beats detected with Respiration Data
  • All back to 32 bit version for stable serial communication
  • Other minor improvements/additions
• 3.2 (r802)
  • Import Labels option customized
  • Open and Analyze Files where one or more channels are not recorded with maximum sampling frequency
  • Operating System Check and use of 32/64 bit java respective to operating system
  • Included Java Version and JVM information in the program
  • Event time and Signal Time are synced when raw signal is exported.
  • Electrode distance and Specific Resistivity of the blood values are editable and can be saved to AMSData File.
  • Other minor improvements/additions
• 3.1 (r743)
  • Other minor improvements / additions
• 3.0 (r739)
  • Automatic Scoring for ECG Characteristic Points
  • Skin Conductance Data analyzed & presented in a new tab (under development)
  • Label based export of Skin Conductance Data
  • Option to remove all HIGH & MEDIUM Suspicious Beats in Detect R-Peaks Tab
  • Experimental information added to time based labels
  • Divide a particular label into time labels of chosen interval.
  • Batch Export of Raw Signals with & without label information
  • Batch Analyze & Export Data (ASCII & Excel) for automatic scoring of ECG & ICG Complexes
  • Possible to add labels even if only one channel is recorded
  • Fixed freeze with connection lost problems
  • Automatically establishing connection on connection lost during online mode
  • Instant Heart Rate during online mode
  • Other minor improvements / additions
• 2.2
  • Added Copy/Paste Labels in Label Data tab
  • Added Batch export data to ASCII
  • Added ICG, ECG and SCL warnings in Configure Device window
  • Added “Never ask me again” option to update available window
  • Fixed freeze when opening file without ICG
  • Other minor improvements / additions
• 2.1
  • Fixed error when updating to Java 7
  • Enabled VU-DAMS suite and Bluetooth database updates via internet
  • VU-DAMS suite version now always visible in upper left corner
  • Other minor improvements / additions
• 2.0
  • Many improvements / additions
• 1.01
  • Initial release